CeDUR Synthetic Roofing Products Technical Information

CeDUR weighs only 170 pounds per roofing square. One roofing square, or square of roofing product, is the amount of material needed to cover 100 square feet of roof area. With CeDUR there should be no structural concerns at this weight. If you are working on a historical landmark or aged structure, it is best to consult with a CeDUR Team Member prior to installation.

No. CeDUR should not be installed over existing roofing materials. Improper installation will void the warranty.

CeDUR has established a strong network of roofing contractors that represent the highest standard of excellence, quality, and knowledge in the residential roofing industry. If you need assistance choosing a quality local roofing contractor, click here to visit our Find a Contractor page.

No sealant is required on cut surfaces and no repair is required if CeDUR is cut or chipped because our product is developed to prevent moisture intrusion with Closed Cell Technology and features color through pigmentation and no cavity back.

Fire ratings (UL 790 testing protocol) are granted at one of three levels: Class A, Class B, and Class C. Class A is the highest rating a product can receive. The Class A Rating indicates the product has equaled the testing industry's most stringent fire resistance standard, a measure of how the roof will perform in severe fire conditions.

CeDUR boasts a Class A Fire Rating without the need of a special fire-resistant underlayment. When comparing fire resistance of synthetic roofing materials it is wise to understand that other synthetic, composite, or polymer based roofing products require a special fire-resistant underlayment during the roof installation. CeDUR is the only product that does not require that special underlayment.

Through our State of the Art Polyurethane manufacturing process we are able to engineer a product that provides high insulation value and is extremely resistant to fire. CeDUR shakes are a solid top to bottom and front to back and do not feature a cavity back underside. In addition, CeDUR is also composed of polyurethane where as most other synthetic or composite roofing products are composed of polyethylene.

Natural wood shakes ignite at 375 degrees Fahrenheit, the temperature on our Class A burn test reached a temperature in excess of 1,400 degrees Fahrenheit and CeDUR roofing shakes did not ignite. Through our patented manufacturing process CeDUR shakes achieve a Class A Fire Rating without the use of a special fire resistant underlayment. Discerning homeowners and industry professionals choose CeDUR because of our extreme fire resistance and stunning wood beauty.

Yes, CeDUR can be installed in cold weather. However extra care should be taken when installations occur in temperatures below 40°F (4.4°C) and you should consult with CeDUR or a professional contractor if you are going to install CeDUR in temperatures below 40°F (4.4°C).

CeDUR is certified to a wind speed of 115 miles per hour (3 second gust) with a mean roof height no greater than 40 feet. Above 115 mile per hour wind resistance, installations are considered high wind and CeDUR should be consulted for proper design. By decreasing the exposure we are able to withstand greater wind speed. CeDUR is warrantied for wind speeds up to 90 miles per hour. For more information contact the CeDUR Technical Team at (720) 974-9200.

With installations dating back to 1998 CeDUR has been one of the leaders in the composite synthetic roofing product market. For over 20 years CeDUR has proven itself a reliable and dependable roofing material in one of nature's toughest testing grounds -the Western United States- where hail, wind, rain, fire, and snow conspire against all things man made.

The CeDUR Limited Warranty is a 50 Year Limited Warranty. Transferable in the first 5 years. Material and labor covered in first 10 years. Material pro rated after 10 year mark.